Recently had to update my tuning adapter with one from VECIMA. Cox installed it and all of my TiVos work fine. When I went to run HD Homerun it won't tune any channels in. Did a rescan of the channel line up, rebooted the HD HomeRun box and still no luck. I tried to update the firmware, but that failed. I made a separate post for that issue. Just checking to see if anyone else has had this update and run into any problems.
Thanks,
Ken
new cox tuning adapter
Re: new cox tuning adapter
VECIMA tuning adapters are supported, support added in the 20220822 firmware.
Topic continued in your other thread here:
viewtopic.php?t=79123
Topic continued in your other thread here:
viewtopic.php?t=79123
Re: new cox tuning adapter
When using a VECIMA tuning adapter make sure the cable feed is connected to the VECIMA box, then the RF output of the VECIMA box is connected to the HDHomeRun.
Do not split the cable feed and feed the HDHomeRun separately.
This is critical as the VECIMA generates the OOB RF signal the HDHomeRun needs to function.
Do not split the cable feed and feed the HDHomeRun separately.
This is critical as the VECIMA generates the OOB RF signal the HDHomeRun needs to function.